The Acceleration Sensor has been developed for the continuous monitoring of the vibration speed. The Acceleration Sensor is available in different versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range. The Acceleration Sensor measures the vibration speed in the range of ± 12.7 mm / s or ± 25.4 mm / s in the frequency range between 3 Hz and 1500 kHz.
The measured vibration speed is output as a 4 ... 20 mA process current. The Acceleration Sensor is looped through a MIL-C-5015 connector to a controller or process display. Depending on the design, the connection socket is attached to the vibration sensor vertically or horizontally. The Acceleration Sensor can be operated with a voltage of 12 ... 24 V DC.
- horizontal or vertical installation
- Process signal output
- MIL-C-5015 connector
- M6 process connection
- different measuring ranges
- robust construction
Measuring range
± 12.7 mm / s
frequency range 3 ... 1500 Hz
output 2 conductors 4 ... 20 mA
sensitivity <5%
Shock limit ± 1000 g
Power supply 12 ... 24 V DC in current loop
Isolation from ground > 108 ohms
Output impedance <100 ohms
design horizontal connection
Electrical connections Pin A: + 4 ... 20 mA
Pin B: - 4 ... 20 mA
Connection type 2 pin MIL-C-5015
operating temperatur -40 ... 85 ° C
Dimensions Ø22 x51
Mounting thread M6
1 x Acceleration Sensor PCE-PVS 30
1 x MIL-C 5015 plug to 5 m cable
1 x instruction manual
Get in Touch
Dhanbad Lab Instruments India Pvt Ltd,
Flat No-IID, Sunrise Tower, Nawadih, Po-B-Polytechnic, Dhanbad-828130, Jharkhand, India |
[email protected]
+91 76677-81649, +91-98355-55989
.jpg)
.jpg)
.png)